编号组件描述1保护导体连接PE低抗性防护接地和工业PC 2电源的功能接地(X101)连接电源和工业PC 3状态的电源和外部接线,用于UPS-OCT,Power,Power,Power,Power,Mose Storage设备,TWINCAT 4 ETRENENT INTERTIC (X106-109) Connection of peripheral devices 6 DisplayPorts (X110, X111) Transmission of the video signal 7 Side cover Access to battery and storage media 8 Name plate Information on the equipment of the industrial PC 9 Mounting plate Plate for mounting the industrial PC over the narrow sides in the control cabinet 10a PCIe module slot 1 Slot for Beckhoff PCIe compact modules 10b PCIe module slot 2 Slot for Beckhoff PCIe紧凑型模块
• Fast charging • Multi-positionning mounting • Very safe and environmental friendly • Extensive cycle life: over 2000 cycles • Very low self-discharge • Cold temperature performance • Waterproof design • Ready to use: just plug and play • Robust brass terminals • Heat resistance: up to 230°C • Lighter weight
• Fast charging • Multi-positionning mounting • Very safe and environmental friendly • Extensive cycle life: over 2000 cycles • Very low self-discharge • Cold temperature performance • Waterproof design • Ready to use: just plug and play • Robust brass terminals • Heat resistance: up to 230°C • Lighter weight
• Fast charging • Multi-positionning mounting • Very safe and environmental friendly • Extensive cycle life: over 2000 cycles • Very low self-discharge • Cold temperature performance • Waterproof design • Ready to use: just plug and play • Robust brass terminals • Heat resistance: up to 230 C° • Lighter weight
at varying height and widths - Discreate 1-7/8" profile designed for even illumination and low glare - Power supply and lighting control fully integrated - 970 lumens per foot (direct) - 950 watts per power feed (52' with max output) - 15° and 30° direct beam options plus 35° x 15° elliptical - UGR <10 - Multiple mounting and finish options available
配件订单号带有YDP03-0CE在法律计量学中使用日期,时间和统计程序条计划打印机YDP04•5纸卷,每个纸卷,每个纸卷,ydp03-0ce | ydp04•50 m 6906937 | thermal print head, 0CEV220 connecting cable and external power supply • 3 paper rolls for 69Y03090 YDP04IS-0CEV220 60 mm x 75 m,thermal-sensitive paper • Labels for YDP04IS-0CEV220 Small, 56 + 30 mm, quantity: 1135 69Y03092 Medium, 56 + 76 mm, quantity: 500 69Y03093 Large, 56 + 100 mm, quantity: 380 69Y03094 Column for display units of the YDH01EA -DCE and -EDE models (raised display mounting on the platform, 325 mm) Column for display units of the YDH02EA -DCE and -EDE models (raised display mounting on the platform, 500 mm) Column for display units of the YDH04EA -FEG models (raised display mounting on the platform, 750毫米)板凳或YDH03EA壁挂式延伸线的显示支架之间的VF1514平台和显示单元之间;对于-dce和-Ede模型(2.5 m);只能由6960EA01的快速工厂透明防尘盖安装,显示单元(备用)远程显示(标准EA或VF1279 EB显示单元作为第二个指示灯; 2.5 m电缆);只能通过我们的快速工厂远程显示器安装连接YRD02Z与接口端口PC接口电缆,25-contact 7357312 PC接口电缆,9针7357314可充电电池组合YRB05Z(外部; 48HRS。操作; 8小时。充电时间)将电池电缆连接到电池VF1142软盘与可用的软件可按要求(公司名称或类似)(免费)(免费)
BATTERY POWER UNITS WITH STANDARD MOUNTING BASE List Price BA/WT-BLE-Q-BAT Wireless BAPI-Stat “Quantum” Temp Sensor, Battery Power........................................................ $215 BA/WT-BLE-Q-S-BAT Wireless BAPI-Stat “Quantum” Temp Sensor, Setpoint, Battery Power......................................... $221 BA/WT-BLE-Q-SO-BAT无线bapi-stat“量子”温度传感器,设定点,覆盖,电池电源......................................................................................................................................................................................................................................................................................................................................................................... $ 226
• Physical activity: "Any bodily movement ► ↗ Energy expenditure" (Margaritis): mounting stairs, walking ... • physical exercise, a subset of physical activity: planned, structured and repetitive: jogging, weightlifting ... • From 2006: promotion of AP in smokers: "its advantages similar to those of other aids" ( 2009: the regular AP = predictor of abstinence; ¼ of the smokers move at the start of ST(磨蚀剂)
Test cells shall be secured to the testing machine by means of a rigid mount which will support all mounting surfaces of each test cell.Each cell or battery shall be subjected to a half-sine shock of peak acceleration of 150 gn and pulse duration of 6 milliseconds.Alternatively, large cells may be subjected to a half-sine shock of peak acceleration of 50 gn and pulse duration of 11 milliseconds.Each cell shall be subjected to three shocks in the positive direction followed by three shocks in the negative direction of three mutually perpendicular mounting positions of the cell or battery for a total of 18 shocks./ 以稳固的托架固定住每个样品。对每个电芯 样品以峰值为 150gn 的半正弦的加速度撞击,脉冲持 续 6ms ,另外,大电芯须经受最大加速度 50gn 和脉 冲持续时间 11ms 的半正弦波冲击,每个样品必须在 三个互相垂直的电池安装方位的正方向经受三次冲 击,接着在反方向经受三次冲击,总共经受 18 次冲 击。
3。ServiceandMaintenance ......................................................................................................................................................................................... 37 3.1.Pedal Mechanism Mounting .......................................................................................................................................................................... 37 3.2.Brakeservice ............................................................................................................................................................................................................ 38 3.2.1.Establishingtheclearance ................................................................................................................................ 39 3.3.Openingthebrakeline ............................................................................................................................................................................. 40 3.3.1.DSCbrake ................................................................................................................................................................................... 40 3.3.2.DSCibrake .................................................................................................................................................................................. 40 3.4.Brakefluid ...................................................................................................................................................................................................................... 41 3.5.Brakebleeding ....................................................................................................................................................................................................... 41 3.5.1.NoteforService ................................................................................................................................................................. 41 3.5.2.Brakefluidexpansiontank ................................................................................................................................ 42 3.5.3.Activating the Routine for Brake Fluid Renewal ........................................................................ 42 3.5.4.Evacuatingtheoldbrakefluid ..................................................................................................................... 42 3.5.5.冲洗压力室.............................................................................................................................Sequenceforbrakebleeding ........................................................................................................................ 44 3.5.7.Finalsteps ................................................................................................................................................................................... 44 3.5.8.特殊情况下的制动出血例程..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... 44 3.6。Leak-testingthebrakehydraulics ........................................................................................................................................... 45 3.7.DSCandDSCiunit ......................................................................................................................................................................................... 45 3.7.1.NotesforService ............................................................................................................................................................. 46 3.8.ServicefunctionsinISTA ..................................................................................................................................................................... 46