Summary Page: Short-term forecasts 3 Table 1 - 2024: Growth in GDP and its components (% change) 4 Table 2 - 2024: Growth in prices and monetary indicators (% change) 5 Table 3 - 2024: Growth in other selected variables (% change) 6 Table 4 - 2025: Growth in GDP and its components (% change) 7 Table 5 - 2025: Growth in prices and monetary indicators (% change) 8 Table 6 - 2025: Growth in other selected variables (% change) 9 Average of independent forecasts for 2024; GDP growth, CPI and RPI inflation and claimant unemployment 10 Average of independent forecasts for 2024; Current account and PSNB (2024-25) 11 Average of independent forecasts for 2025; GDP growth, CPI and RPI inflation and claimant unemployment 12 Average of independent forecasts for 2025; Current account and PSNB (2025-26) 13 Dispersion around the independent consensus for 2024; GDP growth, CPI and RPI inflation made in the last 3 months 14 Dispersion around the independent consensus for 2024; LFS unemployment, current account and PSNB (2024-25) made in last 3 months 15 Dispersion around the independent consensus for 2025; GDP growth, CPI and RPI inflation made in the last 3 months 16 Dispersion around the independent consensus for 2025; LFS unemployment, current account and PSNB (2025-26) made in last 3 months 17 Annex 1: Forecasting institutions referred to in charts and tables 18 Annex 2: Data definitions 19 Annex 3: Notation used in tables 20 Annex 4: Organisation contact details 21
lon(ncells)float64 101MB 45.0 45.04 44.96 ... 315.0 315.0 315.0 lat(ncells)float64 101Mb 0.0373 0.0746 0.0746 0.0746 0.0746 ... 315.0 315.0 lat_bounds (ncells, cell_corners) float64 403MB 0.0746 0.0373 ... -0.0373 * time (time) datetime64[ns] 192B 2024-01-01 ... 2024-01-01T23:00:00 Dimensions without coordinates: ncells, cell_corners Data variables:
3.1.1 Available Commands ...................................................................... 9 3.1.2 How the Game Works ..................................................................... 10 3.1.3 Objective of the Game .................................................................... 11 3.2 Modifications in StarClash ...................................................................... 11 3.3 Definition of Variables ..................................................................................................................................................................................................................................................................................................................................................................................................................... ...................................................................................................................................................................................................................................RESULTS ...................................................................................................... 16 4.1 Simple Agent vs Advanced Agent ........................................................... 16 4.2 Testing Simple Agent Against Random AI ............................................. 17 4.3 Testing Advanced Agent Against Random AI ........................................ 18 5.讨论................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... .............................................................................................................................................................................................................................................................................................................................................................................
scientific method - observation, detect, investigation, control of variables, models solutions - preparing solutions, dilution, use of pipet, measure chemical structures - atomic structure and electron levels chemical reactions - changes in properties of matter, catalyst, oxidation and oxidizers, chemistry of luminol energy and matter - light from chemical reactions, luminescence, quantum, photon, excited state, emission of light, kinetics (rates of反应)科学与历史 - 普朗克和爱因斯坦以及量子科学与环境 - 萤火虫和生物发光,科学和技术 - 法医安全版权版权所有©1994-2013,Science of Science,Inc。
单个变量的函数:Rolle的定理和Lagrange的平均值定理(MVT),Cauchy的MVT,Taylor's和Maclaurin的系列,Asymptotes&Curvature(Cartesian,Polar,极性形式)。(8) Functions of several variables: Function of two variables, Limit, Continuity and Differentiability, Partial derivatives, Partial derivatives of implicit function, Homogeneous function, Euler's theorem and its converse, Exact differential, Jacobian, Taylor's & Maclaurin's series, Maxima and Minima, Necessary and sufficient condition for maxima and minima (no proof), Stationary points, Lagrange's乘数的方法。(10)序列和序列:序列,序列的限制及其性质,一系列积极术语,收敛的必要条件,比较测试,D Alembert的比率测试,Cauchy的根测试,交替的序列,Leibnitz的规则,绝对和条件收敛。(6)积分计算:积分计算的平均值定理,不正确的积分及IT分类,beta和γ功能,在皇家和极地坐标,伦理固体的体积和表面积,皇家和极地的体积和表面积的面积和长度通过双重整合的体积,体积作为三个积分。(10)矢量计算:矢量值及其不同,线路积分,表面积分,体积积分,梯度,卷曲,弯曲,散射,格林定理(包括向量形式),Stokes的定理,Gauss的Divergence定理及其应用。(10)
利用骨料码头是提高和提高软土轴承能力的方法之一。这些码头的最终轴承能力受参数的影响,例如墩的物理特性,结构条件,墩的嵌入深度和piers的替换比,这使轴承能力的估计复杂化。在这项研究中,将基因表达编程方法用于预测用骨料码头增强的粘土土壤的最终轴承能力。For this purpose, two different models were developed, of which the first model (GEP2) utilized two input variables, the undrained shear strength of clay (S u ) and replacement ratio (a r ), while the second model (GEP4) used four input variables including the undrained shear strength of clay (S u ), replacement ratio (a r ), slenderness ratio (S r ), and embedment depth of码头(D F)。GEP2模型的确定系数和GEP4模型分别为0.921和0.942。此外,将该研究的GEP4模型与先前研究的开发模型进行了比较,证实了GEP4模型的出色性能,考虑到输入参数的准确性和数量。敏感性分析的结果表明,粘土(S U),替换比(A R),细长比(S R)和墩的嵌入深度(D F)的未排水剪切强度分别对轴承能力的预测具有最大的影响。此外,参数分析表明,增加S u,a r,s r和d f将提高骨料码头增强粘土的轴承能力。
●Breiman(2001)首先提出了随机森林算法,但基于1995年的Tim Kan Ho●RF采用了两种集合技术:首先是训练样本,以种植基于不同培训训练数据的树木森林。第二个是特征空间的子采样。●如果我选择变量的子集(例如x1, x3, x7) to create a split in a node of a decision tree, and another subset (x2, x4, x5, x7) to create a different one, there will be events that get classified in a different way by the two nodes ● Often there is a dominant variables that is used to decide the split, offsetting the power of the subdominant ones.rf通过减少不同树的相关性来避免该问题
PAC Control Basic includes all the features you need for most applications, including: • A Strategy Tree that provides a graphical view of your control system configuration, including I/O points and variables • A comprehensive, plain-English command set , including commands for analog process and digital sequential control, logic and math, conditional branching, string handling, serial device control, PID loop control, data tables, and more complex functions • Flowchart-based programming , which lets you write在视觉上控制策略,并为梯子逻辑编程提供了更直观的替代方案•OptoScript™编程,类似于Pascal或C类似的可选高级脚本语言,非常适合经验丰富的控制工程师,他们喜欢程序开发程序开发•用于更有效的重复任务和流程的子例程的方法和程序。•实时踏入控制程序及其子例程的图形调试器
3 The Bayesian Network Representation 45 3.1 Exploiting Independence Properties 45 3.1.1 Independent Random Variables 45 3.1.2 The Conditional Parameterization 46 3.1.3 The Naive Bayes Model 48 3.2 Bayesian Networks 51 3.2.1 The Student Example Revisited 52 3.2.2 Basic Independencies in Bayesian Networks 56 3.2.3 Graphs and Distributions 60 3.3 Independencies in Graphs 68 3.3.1 D-separation 69 3.3.2 Soundness and Completeness 72 3.3.3 An Algorithm for d-Separation 74 3.3.4 I-Equivalence 76 3.4 From Distributions to Graphs 78 3.4.1 Minimal I-Maps 79 3.4.2 Perfect Maps 81 3.4.3 Finding Perfect Maps ⋆ 83 3.5 Summary 92 3.6 Relevant Literature 93 3.7 Exercises 96
A/D 校准。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。4 A/D 系数计算。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。5 BANK A 模式。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。6 BANK B 模式。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。6 BANK 用户模式。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。7 引导加载程序版本。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。7 校准插入件。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。8 校准零点。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。9 个频道。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。10 清除。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。11 清除累积错误缓冲区 .....< div> 。。。。。。。。。。。。。。。 < /div>.......... div>............12 控制压力复位 . div>.....。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。13 删除。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。14 三角洲。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。15 数字输出。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。16 错误。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。17 文件。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。18 填充。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。19 获取累积错误。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。20 插入 .。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。21 列出 A/D 校正表。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。22 列出所有换算系数。。。。。。。。。。。。。。。。。。。.......................23 列出引导加载程序组变量。。。。。。。。。。。。。。。。。。。。。。。。。...............24 列出校准变量 .........。。。。。。。。。。。。。。。。。。。。。。。。...............25 列出数字变量 .........。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。26 列表文件。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。27 列出增益变量。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。28 列出 ID 芯片标识。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。29 列出 ID 芯片设置。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。30 列出识别变量。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。32 列出主转换系数。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。33 列出模块信息变量。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。34 列出网络附加存储变量。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。35 列出偏移变量。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。36 列出配置文件列表设置。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。37 列出实时数据分析设置。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。38 列出扫描变量。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。........39 列出扫描组变量 .............。。。。。。。。。。。。。。。。。。。。。。。。........40 列表系统组件 .............。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。41