课程结构的详细信息在LINAC(遥控单元,各种硬件,固件和软件)的土著低温仪器的快速概述设计详细信息的详细信息详细信息。(RS232 communication -Hardware, Firmware & Software ) Design details of Indigenous LHe/LN2 level meters/servers ( Ethernet communication– Hardware, Firmware & Software ) Design details of IUAC Control output servers (Ethernet - RS232 – Hardware, Firmware & Software) Design details of embedded servers and IoT design, ML in future Cryogenic Instrumentation Design details of用于接口/自动化/数据采集的LabView软件与IUAC设备具有32位微控制器设计
Table 1: TOE Models and Firmware Versions ................................................................................................... 7 Table 2: TOE Hardware and Firmware ............................................................................................................... 11 Table 3: TOE Security Functional Components ............................................................................................. 16 Table 4: Assurance组件................................................................................................................................................................................................................................................... 22表5:加密功能...........................................................................................................................................................................................................................................................................................................................................个人资料来源....................................................................................................................................................................................................................................................................................................................................................................................................................... 34表8:安全功能vs.要求映射......................................................................................................................................................................................................................................................................................................................................................................................................................................................... 36
Introduction 4 What's New 5 Disk Expansion 5 Product Integration and Support 8 Upgrade instructions 10 Image checksums 10 Upgrading from previous releases 10 Repartitioning the hard disk 17 To use the special firmware image to repartition the operating system's disk 17 To repartition the operating system's disk without the special firmware image 18 Upgrading an HA cluster 19 Downgrading to a previous release 20 FortiWeb-VM license validation after upgrade从5.4前版本21解决问题22已知问题23
Introduction and Installation ............................................................................................................. 6 Target Audience .............................................................................................................. 6 Requirements .................................................................................................................. 7 Printer Platform ......................................................................................................... 7 Firmware Requirements ........................................................................................... 7 Connectivity .............................................................................................................. 7 Operating Systems ................................................................................................... 7 Feature Overview ..................................................................................................... 8 Installing Zebra Printer Setup Utility ................................................................................ 9 Sideloading ................................................................................................................... 10
针对嵌入式设备的主要攻击向量之一是未经授权或恶意固件修改。攻击者利用固件中的漏洞来引入恶意软件,提取敏感信息或中断操作。例如,攻击者可以替换工业控制器中的固件,以破坏制造业线或在医疗设备中修改软件以损害患者的安全性。Secure启动和固件身份验证机制旨在通过确保仅允许被验证并无效地执行的固件来确保这些风险来确保这些风险。这些机制利用加密技术来验证设备启动之前固件的完整性和真实性。这可以确保即使攻击者获得对设备的物理或远程访问,他们也无法执行未经授权的代码。
Change Log 6 Introduction and supported models 9 Supported models 9 Special notices 10 IPsec phase 1 interface type cannot be changed after it is configured 10 IP pools and VIPs are not considered local addresses for certain FortiOS versions 10 Support for FortiGates with NP7 processors and hyperscale firewall features 10 Changes in CLI 11 Changes in GUI behavior 13 Changes in default behavior 14 Changes in default values 15 Changes in table size 16 New features or enhancements 17 Upgrade information 30 Fortinet Security Fabric upgrade 30 Downgrading to previous firmware versions 31 Firmware image checksums 32 Strong cryptographic cipher requirements for FortiAP 32 FortiGate VM VDOM licenses 32 VDOM link and policy configuration is lost after upgrading if VDOM and VDOM link have the same name 32 GUI firmware upgrade does not respect upgrade path 33 Product integration and support 34 Virtualization environments 35 Language support 35 SSL VPN支持36 SSL VPN Web模式36解决问题37反垃圾邮件37抗病毒37应用程序控制37数据泄漏预防38端点控制38显式代理38 FIREWALL 38 FORTIVIEW 40 GUI 40 HA 42 HYPERSCALE 42 HYPERSCALE 43 ICAP 44 ICAP 44
1。运行固件更新工具安装程序。记下固件更新工具在计算机上安装的位置。2。将要更新到计算机的EV2400连接。3。确保没有其他EV2400连接到用于固件更新的计算机。4。转到安装固件更新工具的位置。运行固件更新工具。5。更新工具应检测到连接的EV2400,显示当前的固件版本,并提示用户继续更新EV2400固件。6。键入y,然后按Enter。7。固件更新工具应将EV2400放置在FW更新模式中,执行较旧的EV2400版本的固件的大规模擦除,编程EV2400,然后重置设备。该工具将提示用户在完成后继续。8。按Enter关闭固件更新工具。9。从个人计算机(PC)拔下EV2400。10。打开包含bqstudio安装程序包的存档,并将其内容复制到临时目录中。11。通过将版本添加到末端来重命名任何以前的电池管理工作室文件夹。12。打开从TI网站下载的BQSTUDIO安装程序文件。13。按照屏幕上的说明进行操作,直到完成软件安装。14。在启动评估软件之前,请将EV2400 USB电缆连接到计算机,I2C端口将EVM板连接到EVM板(J11)。
2 AWS硝基卡安全引擎................................................................................................................................................................................................................................................................................................................................................................................................................................................... 6 2.1加密模块规格........................................................................................................... 7 2.1.2 Firmware Description .............................................................................................................................. 8 2.1.3 Module Validation Level .......................................................................................................................... 8 2.2 Description of Approved Modes ................................................................................................................... 9 2.3 Cryptographic Module Boundary ................................................................................................................. 9 2.3.1 Hardware Block Diagram ....................................................................................................................... 10
eclypsium维护了该行业唯一的固件和微码声誉数据库,超过1200万种不同的固件二进制文件!这使运营团队相信他们正在运行受信任的,批准的固件。eclypium使操作团队能够为单个设备和设备组设置基线,并检测从所需状态的特定组件固件中的漂移。此外,eclypsium的自动化二进制分析复制了人类安全研究人员的工具和技术,以不断分析用于生产和发现零日脆弱性和恶意行为的固件二进制文件(请参见下面的图)。
组件或系统信息启用检测,维修或接种,例如:1。组件状态和/或行为的低分辨率颗粒信号2。历史告知过去已知的本地和全球善良国家3。数据,攻击者和/或通过网络杀伤链所使用的漏洞使用攻击者使用的唯一价值取证数据(例如,说明了相关的独特属性)和不可变化的属性)和不可变化的(例如,数据的含义在已知的时间范围内都不会在已知的时间范围内变化)对所有量的关键组成部分的覆盖范围,从而使量不多(两者)均可构成量不多(两者)。 零值 - 每个组件都在监视其同龄人以检测,修复和接种证明证据或证明某物的证据,而不是在Python上写下的红色C模型软件,用于在各种实验条件下重播/模拟红色C数据集和总线消息(例如,在各种实验条件下(例如,计算约束,bass band basswids Confects,bass band basswidths约束),定时,定时, enabling algorithm development Red- C Compliant Firmware with the functionality of either TA1 and/or TA2, which is interoperable with all other Red- C compliant firmware Open-Source Publish to the internet with a license that does not restrict commercial or academic use by other parties (e.g., the MIT License) in two or more locations (i.e., Test and Evaluation Team website and another code repository e.g., GitHub) Detection Identification of网络攻击和受影响的组件维修系统和/或组件的全球和局部状态变化确保系统处于有效状态攻击者和/或通过网络杀伤链所使用的漏洞使用攻击者使用的唯一价值取证数据(例如,说明了相关的独特属性)和不可变化的属性)和不可变化的(例如,数据的含义在已知的时间范围内都不会在已知的时间范围内变化)对所有量的关键组成部分的覆盖范围,从而使量不多(两者)均可构成量不多(两者)。零值 - 每个组件都在监视其同龄人以检测,修复和接种证明证据或证明某物的证据,而不是在Python上写下的红色C模型软件,用于在各种实验条件下重播/模拟红色C数据集和总线消息(例如,在各种实验条件下(例如,计算约束,bass band basswids Confects,bass band basswidths约束),定时,定时, enabling algorithm development Red- C Compliant Firmware with the functionality of either TA1 and/or TA2, which is interoperable with all other Red- C compliant firmware Open-Source Publish to the internet with a license that does not restrict commercial or academic use by other parties (e.g., the MIT License) in two or more locations (i.e., Test and Evaluation Team website and another code repository e.g., GitHub) Detection Identification of网络攻击和受影响的组件维修系统和/或组件的全球和局部状态变化确保系统处于有效状态enabling algorithm development Red- C Compliant Firmware with the functionality of either TA1 and/or TA2, which is interoperable with all other Red- C compliant firmware Open-Source Publish to the internet with a license that does not restrict commercial or academic use by other parties (e.g., the MIT License) in two or more locations (i.e., Test and Evaluation Team website and another code repository e.g., GitHub) Detection Identification of网络攻击和受影响的组件维修系统和/或组件的全球和局部状态变化确保系统处于有效状态